Diamond core drill for concrete with tripod and case, 1300 rpm, 2200 W

Manufacturer code: 10062273
The MSW concrete drill allows you to reliably drill holes in hard materials such as concrete, masonry, or asphalt. The tool has a power output of 2200 W and a maximum speed of 1300 rpm. These are ideal specifications for core drilling holes up to 162 mm in diameter. The guide rail is 510 mm long. The device must be attached to a 60 mm diameter chuck. The drilling angle can be set between 0 and 45 degrees in 5-degree increments. For hard walls, use the micro-impact mode, which provides a gentle hammering effect. The concrete drill bit is guided along the rail using a T-shaped handle, the length of which is adjustable. The device features an integrated water cooling system, which reduces drill bit wear, minimizes machine maintenance, and ensures a longer service life. Core drill bits are used with the drill, which are secured using a chuck. They can be used to drill in reinforced concrete, cement, masonry, asphalt, or natural stone. A built-in residual current device (RCD) stops the machine in the event of a short circuit for safety. The set includes three diamond core bits with diameters of 52, 82, and 102 mm.
Included:

• - Concrete drill
• - Molded plastic housing
• - 2 wrenches
• - Quick-connect coupling for suction hose
• - Quick-connect coupling for water hose
• - Front handle
• - Carbon brush
• - Stand for concrete drill
• - Hand crank
• - Bracket (60 mm dia.)
• - Mounting accessories